车库门遥控器失灵解决办法

Solution to Garage Door Remote Control Malfunction

　　如果车库门遥控器失灵，可以尝试以下解决办法：

If the garage door remote control fails, the following solutions can be tried:

　　检查电池。更换新电池，看是否可以恢复正常工作。

Check the battery. Replace the battery and see if it can resume normal operation.

　　检查遥控器的接头。如果接头松动或脱落，可以重新连接或拧紧。

Check the connector of the remote control. If the connector is loose or detached, it can be reconnected or tightened.

　　检查电路连接线。如果电路连接线松动或断裂，可以使用双头线插头重新连接。

Check the circuit connection wires. If the circuit connection wire is loose or broken, a double ended plug can be used to reconnect.

　　污垢或增加硬纸片。如果是因为内部结垢导致接触不良，只需污垢即可；如果是因为电路老化导致接触不良，可以剪一小块硬纸片，垫在橡胶垫与电路板的按键之间。

Remove dirt or add hard paper. If poor contact is caused by internal scaling, simply remove the dirt; If the poor contact is caused by circuit aging, you can cut a small piece of hard paper and place it between the rubber pad and the buttons on the circuit board.

　　重新配码。可以尝试重新对码另外一个按键，或者联系人员进行检修修理。

Re code. You can try resetting the code to another button, or contact a professional for maintenance and repair.

　　此外，还可以通过拔电重插、重新调行程、更换电机等方法解决。如果以上方法都没有解决问题，可能是主控制电路板出现故障，建议联系人员进行检修修理。

In addition, it can also be solved by unplugging and reinserting, readjusting the stroke, replacing the motor, and other methods. If none of the above methods solve the problem, it may be a malfunction of the main control circuit board. It is recommended to contact professional personnel for maintenance and repair.

本文由济南车库门为您精心提供，如想了解更多请点击我们的网站：http://www.jiahuawenti.cn，我们将会以的热情为您解答！

this article is carefully provided by jinan garage door. if you want to learn more, please click on our website: http://www.jiahuawenti.cn we will answer you with the greatest enthusiasm!