大家使用过遥控卷帘门都知道，可以用遥控进行将门放下来或者升上去。那如果按遥控没反应是什么原因呢？下面济南卷帘门厂家带大家了解下吧。

Everyone who has used remote control roller shutter doors knows that they can be lowered or raised using remote control. What is the reason why pressing the remote control doesn't respond? Let's take a look at the Jinan roller shutter door manufacturer.

一般遥控不灵有几种情况：

There are several situations where remote control is generally ineffective:

1、电池电量不足，更换电池即可。

1. The battery is low, just replace it.

2、遥控距离偏远，或附近有无线电干扰，离卷帘门近点操作即可。

2. If the remote control distance is remote or there is radio interference nearby, it can be operated close to the rolling shutter door.

3、遥控器使用的年数久了，内部线路板有氧化现象，导致遥控器失灵，打开遥控器清理一下即可。

3. The remote control has been in use for several years, and there is oxidation on the internal circuit board, which causes the remote control to malfunction. Open the remote control and clean it up.

4、遥控器掉码，这属于产品质量问题，需要的厂家人员来操作。

4. The remote control has lost its code, which is a product quality issue and requires professional manufacturer personnel to operate.

5、遥控器前端中间有一个遥控亮点，看看亮点在使用的时候会不会亮，如果不亮的话证明遥控器坏了。也有可能是遥控器的亮灯处，被弄脏了，影响了遥控效果，可以用湿布擦一下，然后再尝试一遍。

5. There is a remote control highlight in the middle of the front end of the remote control to see if it will light up during use. If it does not light up, it indicates that the remote control is broken. It is also possible that the light on the remote control is dirty, which affects the remote control effect. You can wipe it with a damp cloth and try again.

如果遥控卷帘门遥控钥匙点击操作按键时指示灯不亮，此情况只有两种可能：电池没电或者按键失效。更换新的遥控器电池重新尝试操作，失灵问题解决证明是电池不足导致，失灵没有解决就是按键失效。

If the indicator light does not light up when the remote control key of the roller shutter door clicks the operation button, there are only two possibilities: the battery is out of charge or the button is ineffective. Replace the remote control battery with a new one and try the operation again. If the malfunction problem is resolved, it proves to be caused by insufficient battery. If the malfunction is not resolved, it means the button is invalid.

这时候需要拆装遥控器，把电池取下，将遥控器固定螺丝松解，随后拆解遥控器，目的是将遥控器内的灰尘以及其它杂物清洁干净。完成遥控器内部清洁后安装好遥控器并装上新电池，通常就能够解决失灵问题。

At this point, it is necessary to disassemble the remote control, remove the battery, loosen the fixing screws of the remote control, and then disassemble the remote control to clean the dust and other debris inside the remote control. After completing the internal cleaning of the remote control, installing it and installing a new battery usually solves the problem of malfunction.

如果遥控卷帘门遥控钥匙点击操作按键时指示灯点亮但是卷帘门没反应，此时应当将遥控器与接收器重新对码。遥控器与接收器对码正确的做法是查阅产品使用说明书，按照说明书的对码步骤进行遥控器与接收器对码。

If the indicator light illuminates when the remote control key of the roller shutter door clicks the operation button, but the roller shutter door does not respond, the remote control should be re coded with the receiver at this time. The correct way to code the remote control and receiver is to refer to the product manual and follow the code matching steps in the manual.

如果说完成遥控器与接收器对码依旧无法控制卷帘门升降，小编不建议继续自己找故障点并尝试解决，应当请求产品售后服务技师协助处理。更多相关的内容就来我们网站http://www.jiahuawenti.cn咨询吧！

if the remote control and receiver are still unable to control the lifting and lowering of the rolling shutter door after completing the code matching, i do not recommend continuing to find the fault point and try to solve it myself. i should request the assistance of the product after-sales service technician to handle it. for more relevant content, come to our website http://www.jiahuawenti.cn consult!