Electric rolling shutter door has a good windproof safety function and high safety performance. It is also used in food and pharmaceutical industry and most warehouses. Visible electric rolling shutter door has been widely used in all walks of life. Electric rolling shutter door has been widely used in commercial facade, garage, shopping malls, hospitals, factories and enterprises and other public places, so how to extend the service life of its electric rolling shutter door? Let's follow Xiaobian and have a look.

1、电动卷帘门在检修开闭过程中，应具有就地停止的功能，不应停止并继续滑动，如果滑动距离大于50毫米，应立即仔细检查和修理电动卷帘门控制装置和帘门制动，直到正常工作。

1. The electric rolling shutter door shall have the function of local stop in the process of maintenance opening and closing, and shall not stop and continue to slide. If the sliding distance is greater than 50 mm, the control device of electric rolling shutter door and the brake of curtain door shall be carefully checked and repaired immediately until it works normally.

2、电帘门窗帘及生锈部分，应定期进行防腐、油漆及维修处理，严禁重物、硬物对立面的冲击。

2. The curtain and curtain are not allowed to be rusted and rusted, and the curtain should be treated regularly.

3、伸缩门检修基梁的上限位置必须与轴承架下端保持200mm以上的距离，以制动停止时不发生顶部撞击。

3. The upper limit of the inspection base beam of the telescopic door must be kept at a distance of more than 200 mm from the lower end of the bearing frame, so that the top impact will not occur when the brake stops.

济南电动卷帘门

Jinan electric rolling shutter door

4.电幕门安装位置上端应有的防火设施。在电动窗帘门鼓下端制造箱体或天花板时，必须设置可拆卸的活动盖板，并在电动门机下端预留500×500 mm可拆检修孔，以便于维修保养。

4. There should be fire prevention facilities at the upper end of the installation position of the electric curtain door. When manufacturing the box or ceiling at the bottom of the electric curtain door drum, a removable movable cover plate must be set up, and a 500 × 500 mm removable access hole must be reserved at the lower end of the electric door machine for maintenance.

5.所有电动卷帘门，运行电控的方向快门必须是开关盒所指示的相同，尤其是当新的功率汽车或外国输入功率转换阶段，维修电动卷帘门马达的应该是一个手动装置帘放置1/2车门打开位置，功率门操作卷后的试验操作的高度，直到该附件相和指令，在正常使用之前，以其他方式损坏止动件，使得所述反绕卷帘或类似物提升和损失。

5. For all electric rolling shutter doors, the direction of operating electric control shutter must be the same as that indicated by the switch box, especially when the new power automobile or foreign input power conversion stage, the maintenance of electric rolling shutter door motor should be a manual device, the curtain should be placed at 1 / 2 of the door open position, and the test operation height after the power door operates the roll up, until the accessory phase and command, before normal use The stopper is damaged in other ways, so that the reverse winding shutter or the like is lifted and lost.

6、伸缩门维修和操作时，操作人员必须站在能看到卷帘门运行状态的位置，否则容易发生事故和损坏。

6. During the maintenance and operation of the retractable door, the operator must stand at the position where he can see the running state of the rolling shutter door, otherwise it is easy to cause accidents and damages.

7、禁止电动百叶窗门帘和门帘卷绕机与酸性、碱性溶液接触，防止门帘表面腐蚀。

7. It is forbidden to contact the electric shutter curtain and curtain winding machine with acid and alkaline solution to prevent the surface corrosion of the curtain.

8、.电动卷帘门门辊运行，滑行时，驱动器和其它部件应定期检查（每年少两次），和燃料需要及时，以正常使用的电动卷帘门的。

8. When the roller of electric rolling shutter door is running and sliding, the driver and other parts shall be inspected regularly (at least twice a year), and the fuel shall be timely used for the electric rolling shutter door.